Shopping shortcuts

Use these shortcuts to move around the store.

How to choose accessories for speaking and recording

Choose speech and recording accessories by the job you want to do: record while wearing a small microphone, hold a microphone while speaking, use a portable voice system, or position a microphone at a desk. Compare the four options below against that job before deciding which belongs in your setup. Begin with the equipment you already own and the place where you intend to use it.

What do you want your setup to do?

Write a one-sentence brief for your next session. For example, you might want to record a spoken introduction on your phone, speak while holding a microphone, or arrange a desk for regular recording. Then list the device you intend to connect and the space available. Use that list to guide your comparison, and check the exact model and connection requirements before choosing an accessory.

Would a clip-on microphone fit your recording plan?

The mini wireless lavalier microphone is one option to examine for a wearable recording setup. It is a clip-on lavalier model with a stated weight of 5g. The receiver has Type-C and Lightning ports. It is battery powered.

Begin your connection check with the phone or tablet you plan to use, including its exact model and available port. Check your recording app requirements as well. Decide where you would clip the microphone and how you would manage the receiver during the session. Keep the comparison focused on those practical questions before moving on to optional features.

Would you prefer to hold a microphone?

Look at the handheld wireless microphone set if your plan calls for a handheld format. The set includes two wireless microphones and one 6.35 mm Bluetooth receiver. A 3.5 mm audio cable is included. The description lists an all-metal body, volume control, and RGB lighting.

Before choosing this route, identify the equipment you want to connect to the receiver and confirm the input requirements. Plan where each person would stand and how you would pass or hold the microphones. If your main goal is a phone recording, compare the connection process you need for that goal rather than choosing purely by the number of microphones in the box.

Do you want a portable voice system?

The portable 15-watt voice amplifier is another option to consider for your speaking setup. It is a wireless PA system with a Bluetooth headset microphone. It is battery powered and has a stated output of 15 watts. It supports neck-hanging, belt-clipping, or cross-body wear with the included strap.

A USB drive can be connected to play pre-recorded material without a computer. Consider whether your session calls for live speech, prepared audio, or both. Decide how you would wear the unit and where you would keep the playback material. Check the instructions for your intended files before preparing a session around USB playback.

Are you arranging a microphone at a desk?

For a desk setup, examine the microphone boom arm mounting set. The set includes a microphone stand, a zinc alloy table clamp, a 3/8-inch to 5/8-inch metal screw adapter, a pop filter, a shock mount, and five cable ties. The clamp fits desks up to 2 inches thick. The shock mount has a 52mm hole and does not fit Blue Yeti.

Measure your intended clamp location and check the microphone mounting requirements component by component. The boom arm lists Blue Yeti compatibility. Keep that arm specification separate from the shock mount restriction above when planning your setup. Confirm the attachment you intend to use before making a final selection.

Before making your final choice, sketch the setup from start to finish. Name the speaking position, the device you want to connect, and the place where you expect the recording or playback to happen. For a desk arrangement, add your measurements beside the sketch. For a portable arrangement, note how you plan to carry the equipment. Mark any connection or fit question that remains unresolved and check it against the product instructions. Use this sketch as your selection checklist rather than assuming that every accessory in this guide belongs in the same system.

Frequently asked questions

Which ports are listed for the lavalier receiver?

The receiver has Type-C and Lightning ports.

Can the voice amplifier play material from a USB drive?

Its description supports USB-drive playback of pre-recorded material without a computer.

Does the included shock mount fit Blue Yeti?

No; the description explicitly says the shock mount does not fit Blue Yeti.

Tags


Secure Checkout
Safe Payment

Ingresa en

¿Ha olvidado su contraseña?

¿Aún no tienes una cuenta?
Crear una cuenta

Move to cart

Recently viewed

Pick up where you left off, organized by department. Saved on this device.